1000L Customized Complete Brewery Equipment Stainless Steel 304/306 Steam Heated Beer Brewing System

Beer brewhouse bacic configuration

Beer mashing is one of the most important processes in wort preparation.During mashing, the water is thoroughly mixed with the malt.Under the action of various enzymes, the soluble substance in malt was completely leached out, and the wort was fermented into beer under the action of fermentation.

Electric supply:3phase/380(220, 415,440…)v/50 (60)HZ ;Single Phase/ 220(110, 240…)v/50(60)Hz(Customized)

Component:Mash tun, Lauter tun, Boiling Kettle, Whirlpool tun in various combination

Hot water tank and cold water tank for optional in special combinations

Heating method:electric heating,direct fire heating and steam heating.

Material:Stainless steel are popular because of easy maintenance and clean, copper cladding for optional

Other items:Steam/gas/diesel steam boiler,VFD pump,Siemens control panel, flex grist auger,Plate heat exchanger,Oxygen system,pipes,platform

Features of 1000L beer brewhouse

Gross capacity:1400L,

Useful capacity:1000L

Outline size: φ1400*2500 mm.

Inner:SS304.TH=3.0mm      Outer:SS304.TH=2.0mm

Double-layer wall structure with the insulation of 100mm Polyurethane

Steam jacket or heating element

100% TIG welding with pure argon gas shield

Interior Finish: Overall polishing to 0.4~0.6 μm without dead corner

Heavy duty false bottom with 0.7mm gap of the sieve

Fully insulated vessel

SS CIP High-flow rotary spray ball with 360 degree of coverage

Sparge arm assembly

Top manway

Side manway for spent grain out

Sight glass light

Grist hydrator

Raker with VFD motor in Lauter tank

Agitator with VFD motor in boiling tank

Fermentation tank

DEGONG Fermentation tank is double wall isobaric stainless steel tanks, are pressure tested to 3.0 bar and are fitted with a safety pressure valve set at 2.5 bar. Single or dual CIP spay balls are fitted for CIP operation. Overhead cross arm extending to the side is provided with a pressure regulating device and a sanitary air trap for releasing and regulating carbon dioxide during fermentation. Standard provision include front or overhead manhole opening.

Features of 1000L beer fermentation tank

Gross capacity:1300L,

Useful capacity:1000L

Outline size: φ1300*2550 mm.

Inner:SS304.TH=3.0mm      Outer:SS304.TH=2.0mm

100% TIG welding with pure argon gas shield

Interior Finish: Overall polishing to 0.4~0.6 μm without dead corner

Insulation: Polyurethane; TH=100mm

Glycol Jacket: Dimpled plate on cone and side

CO2 blow-off arm with butterfly valve

Full sanitary sampling valve   

Breathing valve on the top of tank

Mechanical relief valve 2 bar on CIP arm

Shockproof pressure gauge on CIP arm

Dry hopping port with solid end cap

4pcs completely SUS304 heavy duty legs with leveling pad and legs support

Thermowell for high accuracy temperature sensor

• As owning an experienced and creative engineering team, we could offer you professional solutions for your plant and equipment.
  

• If you already have solutions, we would fabricate the equipment exactly as per your request.

• We could offer you training of brewing craft beer and operating equipment if needed.

• Equipment can be customized according to your request.

• We also offer you 36 months warranty.

DEGONG Brewery equipment can used in commercial brewery or brewpub or restaurant.DEGONG can provide any type of brewing equipment according to your requirement.If you have interest,please get in touch with me freely.