|Thickness of material (mm):|
|10BBL Cellar Tanks|
We set out to design our line of Jacketed Unitanks by taking the same robust material thicknesses, finishing standards, and glycol jacketing as our micro fermentation tanks, then scale them up to popular brewery sizes. It was also important that us that we borrow popular cues from our Unitanks such as a lower stiffener plate, and heavy tube leg design.
10BBL brewery fermenting vessel top and side manway
Fermentation tank features:
Design Pressure: 0.3Mpa
Interior Shell: 304 stainless steel 3mm
Cooling Jacket: 304 stainless steel 1.5mm
Exterior Shell: 304 stainless steel 2mm
Interior finished to Ra 0.6um sanitary finish and passivated.
Exterior Finish: #4 brush
60 degree cone bottom, jacketed.
Independent dimpled cooling jackets (cone and cylinder) with individual glycol inlet and outlet.
Fully welded exterior shell.
Rotating racking arm with butterfly valve and cover.
CIP arm with spray ball and piping.
Vacuum & pressure relief valve.
Polyurethane insulation thickness 100mm for cooling jacket on side and cone.
Side shadowless manway door.
Note: Photo of equipment is subject to change.
Mini brewery fermenters
Relief valve and lifting lugs
Horizontal lager tanks stacked
Finally, we carried over our popular sampling valve, Racking arm, sleeved thermowell port, and analog thermometer. Then added a carb stone along with a combination CIP and dry hoping port. The line of Jacketed Unitanks strikes the perfect balance of performance.
|Contact Alice Today!|
Ready to Get Started Building Your Dream brewery?