Second, the fermentation process operating procedures1. Fermentation tank cleaning(1) When the beer is finished in the fermentation tank, open the pressure relief valve of the cleaning pipeline to release the pressure to 0 MPa; start to connect the CIP cleaning pipeline and the recovery pipeline, an

(1) Dry addition method Put an appropriate amount of cooled wort into the yeast inoculator, then wash and save the yeast sludge, pour off the upper part of the water, and add the required amount of yeast (0.6%~0.8%) to the inoculator Inside, make the wort and yeast mix evenly.

The output of beer brewing depends on the type and size of brewing equipment, how many batches are brewed per day, how many types of beer are brewed, the size and number of fermenters and the beer fermentation cycle are all factors that need to be considered.

In the process of brewing beer, basically every brewing process will produce residues, and for most breweries, the disposal of these residues is a troublesome thing.The main residues in the entire production process of beer are: wheat roots in the malting process, wheat grains in the saccharification process, residual yeast in the fermentation process, and wastewater discharged from various processes.