Using the correct brewing method, the malt must not be wet to preserve the integrity of the malt in the grinder. After each crushing, clean the grinder of contaminants. During the whole crushing process, if there are pollutants attached to the crusher, it needs to be cleaned before crushing.

1. CIP cleaningThis equipment is equipped with a CIP cleaning device, which is very worry-free to clean up. The water is heated by intense steam, which is switched off to identify components that need to be cleaned. Just start CIP.

1. The pH value damages the enzyme. Throughout the saccharification process, pH often significantly impairs the activity of different enzymes. The high repetitive pH of the water leads to an increase in the pH of the mash, which reduces the uniqueness of the enzymes.

Stabilizers play an important role in craft beer production. In the beer brewing process, the colloidal safety of beer is realized by adding various beer stabilizers, such as protease, tannin, silica gel and PVPP, etc. Some stabilizers can be used alone or in combination, such as the combination of silicone products and PVPP. The brewmaster will talk to you about the role of stabilizers in beer production.