1000L SS304/316 Conical Fermenter And Beer Brew Kettle Complete Beer Brewing System
Home » Brewery Equipment » Beer brewery equipment » 1000L SS304/316 Conical Fermenter And Beer Brew Kettle Complete Beer Brewing System

Product Detail

Share to:

1000L SS304/316 Conical Fermenter And Beer Brew Kettle Complete Beer Brewing System

Beer brewing equipment is used to for multiple beer brewing process,the raw materials are high quality imported malt,wheat malt, black malt,burn fragrant malt and import hops.The active yest species are introduced from Germany. Our fresh pure beer doesn't add any additives and have rich nutrition and unique taste, so it is truly green food.Beer varieties: wheat beer, black beer, green beer and so on.

Thickness of material (mm):
Insulation:
Matrial:
Heating method:
Control panel:
Quantity:
  • DGET-1000L
  • DGET
  • 8438400000


Beer brewing equipment is used for brewing a variety of beer , such as ale,lager, IPA and so on. The raw material of beer brewing is four basic ingredients (water, malt, yeast, hops) and some auxiliary ingredients (sorghum, rice).


Craft-Beer

ALE,LARGE,BRIGHT BEER,DARK BEER


Ale (Top fermentation beer),its fermentation temperature is 16 to 24 ℃.The carbonic acid is low because of its high fermentation temperature.And Its taste is more abundant because adding much condiment.So you can feel its concordances.


Lager(Bottom fermentation beer),its fermentation temperature is 8-12 ℃.Its alcoholicity is low compared to ale,and its taste is softer.Because carbonic acid is higher than ale,so its taste is cool and refreshing.


All of the brewing equipment is customized according to your requirement.If you don't know more about beer brewery machine,our engineer can give you the most professional suggestions according to your brewing plan,such as daily output or others....


Beer brewing system introduction


Mash system, it is the most important part of beer brewery equipment. It consist of mash tun,lauter tun, kettle, whirlpool tank. The tanks can be combined freely,such as mash/lauter tank,boiling/whirlpool tank.All of our equipments are made out of SUS304.


Mash/lauter tun is used to steep the malted grain in hot water to extract the soluble goodness (wort) from the grain to prepare for brewing. 

Boiling whirlpool tank, the wort  boiled for a prescribed time and  infuse the addition of flavorful hops.Then concentrate the heat concretion at conical bottom by whirlpool and discharge them.


1000L 2 vessels stainless steel beer mashing system

1000L 2 vessels stainless steel beer mashing system-mash/lauter tank+boiling/whirlpool tank


Component

  • Mash tun, Lauter tun, Boiling Kettle, Whirlpool tun in various combination 

  • Hot water tank and cold water tank for optional in special combinations

  • Infusion or decoction brewing methods are designed exactly

  • Stainless steel cladding is even the unique because of easy maintenance and clean

  • Two stages or single stage heat exchanger for wort cooling

  • Completely stainless steel integrated work platform 

  • Sanitary and efficiency wort pump

  • All pipings, pipes maniford and fittings


mashing lauter


beer mashing system


Fermentation Tank structure and design differs depending on fermentation process. The normal fermentation tank structure is dish head up and cone down and it is equipped with cooling installation,there is a cooling jacket on tank cone section,two or three cooling jackets on columnar part.This not only can meet the relevant requirements of cooling, guarantee cooling rate of fermentation tank, also help to precipitation and storage the yeast.


beer fermenter

1000L stainless steel isobaric fermentation tank


Features

  • Function: Used for keep wort fermentation or maturation.

  • Standard stainless steel conical cylindrical fermentation tanks 

  • Single, double, triple or more size as brewhouse is common used in commercial breweries

  • Tanks quantity is exactly calculated by fermentation cycle for various beers

  • Roof walkway is for special request

  • Cooling method: dimple plate or glycol cooling jacket both bottom and top.

  • All  valves, pressure gauges,breathing vavle,carbonation stone, fittings etc are included

  • Design pressure is 0.3MPa; Working pressure is 0.15MPa. (MPa can be customized).


Fermenter剪贴细节


Standard features


  • 304 SS or 316LSS or copper.

  • 30% head space at least for each tank

  • Motorized mash mixers, lauter rakes and spent-grain plow

  • ABB Siemens motors/pumps on the whole system

  • Stainless steel process piping, work cabinet and control cabinet

  • Siemens/Schneider/Omron electric element

  • Grirst hydrator bowl with hot/cold liquor blending

  • Sight level indicators on fermenting system.

  • Insulated with a minimum of 100mm Chloride-Free PU Insulation.

  • Interior Finish: Overall polishing to 0.4 μm without dead corner

  • Adjustable Levelers provide a level tank regardless of floor slope;



Service


After delivering the equipments to our customers, Degong will arrange special worker to do the track service,because we set up the marketing department for specially dealing with the feedback of customers for providing the satisfied service. Once Degong gets the feedback from customers, we will do our best to deal with it for you.


Installation service of DEGONG


Contact us


Why choose us:


1.Use the stainless steel plate made by the Chinese best-known stainless steel manufacturing enterprise, quality of steel plate is approved by Chinese testing organizations.


2. Use the Chinese famous brand YUANAN pump (ABB motor), use the wrold famous brand SIEMENS motor, ABB SIEMENS are both the world famous companies. Quality is guaranteed.        

                                                                     

3. CIP tank with Insulation is more safe, which can prevent workers from being scalded.Take automatic temperature controlling system to control temperature, self powering off system prevents electric heating coil from dry heating.


4. Control system uses electric appliances of world famous brand, Schneider, Omron, Danfoss frequency converter ensure the stable runing of the whole system.


5. steam solenoid valve, solenoid valves for fermenters take first or second class brand of Chinese to ensure the stability of brewing and fermentation system


6. Warranty period 3 years


If you have interested in our equipment,please get in touch with me

Auril





Product Inquire

CONTACT US

Add: Jinan City, Shandong, China
E-mail: sales@degonget.com
TEL: +8653158780867
WhatsApp: +8618615185568
Copyright   2018  DEGONG Equipment Technology Co., Ltd.