- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
English  |
| Material: | |
|---|---|
| Insulation: | |
| Polyurathane: | |
| Jacket: | |
| Quantity: | |
DGET-1000L
DGET
8438400000
Fermentation tank is a vertical, tapered, cylindrical vessel for the beer fermentation and maturation processes.Beer fermentation tanks,also refer to Uni-tank,which are vessels of various size usually made from stainless steel that contain a mixture of malted grain, hops, yeast and water to create a liquid collectively known in the brewing process as wort. Fermentation tanks vary in temperature depending upon the beer being produced.
Fermentation tank features
Tank body
Tanks are available with torispherical and conical bottom
Torispherical lid resists high pressure and design according to DIN Standard
Conical bottom assures the easier removal of yeast from the tank
Tanks are available with side, top and bottom manholes depending on the size and your needs
Top manholes can handle high pressure, easily to handle and made in insulated version
Side manholes are can be easily cleaned without any blind area
Material quality of the whole tank is food grade SUS304/SUS316/AISI304/AISI316
Etched and passivated inner surface with a roughness less than 0.4 µm to avoid the contamination spots that are hard to wash
Cooling
2-3-4 cooling zone on cylinder and cone depending on the size
Cooling jackets made with the spot welding technology
100 mm PU foam insulation with a thermal conductivity of 24 mW/mK for the safest storage of heat and economical energy use
100 % stainless steel coating available in a variety of surface finishes such as 2B pickled, different surface roughnesses, polished and marbled
Fittings
All pipes and fittings are made in accordance with DIN Standard
Material quality of all fittings are food grade SUS304/SUS316/AISI304/AISI316
Vacuum and pressure safety valves, complying with all standards and positioned for an easy cleaning
Stainless steel pressure gauge, optionally can be ordered in flat membrane version
Technological pipings on the tank (beer pipe, yeast pipe, CIP pipe) produced with using the bending technology where no welding is used resulting that there are no infection points that might occur at welding jointst
Depending on tank sizes, each tank equipped with 1-2-3 pcs of accurate thermal sensor
Technical parameter
Dimensions | We can provide normal dimension if customer dont have special requirement.If have,we will Design suitable dimension according to customer’s requirement. |
Capacity | Nominal capacity plus 25% |
Top Head | Dished head |
Lifting Lugs | 2 lifting lugs |
CIP | Removable CIP & fixed spray ball (180° up, 65mm) on 1½” TC with 1½” TC line down to working height |
Wall | Inner thickness 3mm;Outer thickness 2mm. |
Bottom Cone | 60° cone angle, ”1½ knuckle radius to cone |
Cooling Jacket | On sidewall and bottom cone – number of zones determined by tank size Maximum 0.3MPA working pressure, 1” to 1½” FNPT inlet / outlet |
Legs | 4pcs completely SUS304 heavy duty legs with leveling pad and legs support |
Insulation | 100mm polyurathane |
Manway | Top manway or side manway |
Drain | 1½” TC butterfly valve c/w “J” pipe |
Tank Material | All quality inspected 304 stainless steel alloy |
Exterior Finish | 2B with all welds ribbon polished |
Interior Finish | 2B with all welds TIG welded with heat stain removed |
Tank Pressure | Maximum 0.3Mpa |
All accessories on tank | •Full sanitary sampling valve •TC Vacuum Pressure relief valve on top head •Mechanical relief valve 2 bar on CIP arm •Shockproof pressure gauge on CIP arm •Dry hopping port with solid end cap •Thermowell for high accuracy temperature sensor •Raking arm •carbonation stone •TC RSL Sample valve |
Delivery&Packing
We will choose Wooden case to protect the equipment from being damaged in transit.If the equipment's height exceed the container's height,we will put down the equipment and fix it by iron frame.
Company
Working shop
Certification
Contact us
If you have interest,please get in touch with me freely.
Fermentation tank is a vertical, tapered, cylindrical vessel for the beer fermentation and maturation processes.Beer fermentation tanks,also refer to Uni-tank,which are vessels of various size usually made from stainless steel that contain a mixture of malted grain, hops, yeast and water to create a liquid collectively known in the brewing process as wort. Fermentation tanks vary in temperature depending upon the beer being produced.
Fermentation tank features
Tank body
Tanks are available with torispherical and conical bottom
Torispherical lid resists high pressure and design according to DIN Standard
Conical bottom assures the easier removal of yeast from the tank
Tanks are available with side, top and bottom manholes depending on the size and your needs
Top manholes can handle high pressure, easily to handle and made in insulated version
Side manholes are can be easily cleaned without any blind area
Material quality of the whole tank is food grade SUS304/SUS316/AISI304/AISI316
Etched and passivated inner surface with a roughness less than 0.4 µm to avoid the contamination spots that are hard to wash
Cooling
2-3-4 cooling zone on cylinder and cone depending on the size
Cooling jackets made with the spot welding technology
100 mm PU foam insulation with a thermal conductivity of 24 mW/mK for the safest storage of heat and economical energy use
100 % stainless steel coating available in a variety of surface finishes such as 2B pickled, different surface roughnesses, polished and marbled
Fittings
All pipes and fittings are made in accordance with DIN Standard
Material quality of all fittings are food grade SUS304/SUS316/AISI304/AISI316
Vacuum and pressure safety valves, complying with all standards and positioned for an easy cleaning
Stainless steel pressure gauge, optionally can be ordered in flat membrane version
Technological pipings on the tank (beer pipe, yeast pipe, CIP pipe) produced with using the bending technology where no welding is used resulting that there are no infection points that might occur at welding jointst
Depending on tank sizes, each tank equipped with 1-2-3 pcs of accurate thermal sensor
Technical parameter
Dimensions | We can provide normal dimension if customer dont have special requirement.If have,we will Design suitable dimension according to customer’s requirement. |
Capacity | Nominal capacity plus 25% |
Top Head | Dished head |
Lifting Lugs | 2 lifting lugs |
CIP | Removable CIP & fixed spray ball (180° up, 65mm) on 1½” TC with 1½” TC line down to working height |
Wall | Inner thickness 3mm;Outer thickness 2mm. |
Bottom Cone | 60° cone angle, ”1½ knuckle radius to cone |
Cooling Jacket | On sidewall and bottom cone – number of zones determined by tank size Maximum 0.3MPA working pressure, 1” to 1½” FNPT inlet / outlet |
Legs | 4pcs completely SUS304 heavy duty legs with leveling pad and legs support |
Insulation | 100mm polyurathane |
Manway | Top manway or side manway |
Drain | 1½” TC butterfly valve c/w “J” pipe |
Tank Material | All quality inspected 304 stainless steel alloy |
Exterior Finish | 2B with all welds ribbon polished |
Interior Finish | 2B with all welds TIG welded with heat stain removed |
Tank Pressure | Maximum 0.3Mpa |
All accessories on tank | •Full sanitary sampling valve •TC Vacuum Pressure relief valve on top head •Mechanical relief valve 2 bar on CIP arm •Shockproof pressure gauge on CIP arm •Dry hopping port with solid end cap •Thermowell for high accuracy temperature sensor •Raking arm •carbonation stone •TC RSL Sample valve |
Delivery&Packing
We will choose Wooden case to protect the equipment from being damaged in transit.If the equipment's height exceed the container's height,we will put down the equipment and fix it by iron frame.
Company
Working shop
Certification
Contact us
If you have interest,please get in touch with me freely.
