Small Automatic 6 Heads Beer Bottling Machine Glass Bottle Filling&capping System

Manual beer bottling machine Steps of use:

1.  Connect beer, compressed air and Co2.

2.  Turn the valve 1 to the position " down", and the cylinder goes down.

3.  Turn the valve 2 to the position  " pressurize" .

4.  Observe the pressure value of the pressure gauge 4, set the pressure value a little lower than the fermenting tank pressure. For example, if the fermenting tank pressure is 0.15 MPA, please set the pressure gauge value as 0.11-0.12 MPA.

5.  Turn the valve 4 to the position " Fill", then it start to fill, when the beer reach the required level , turn the valve 3 to the position " stop", and turn the valve 2  to the position " release", and when the pressure gauge shows "0", turn the valve  1 to the position " up", then the cylinder goes up.

6.  Push the bottles to the capping station, Turn the valve 5 to the position  "down", then it starts to seal, when finished, turn the valve 5 to the station " up" , the cylinder goes up.

 

 

Main function and feature:
1-1.Automatic control by PLC, all parameters can be adjusted.
1-2.Filling and capping proces can be finished by the machine at one time.
1-3.With CO2 pressurization and vacuumization function.
1-4.Adopt isobar filling method and with unique pressure maintaining system, performance stable and reliable, beer loss minimum.
1-5.With pressure compressor, to gurantee a stable filling process.
2.Working process:
Fix the bottles——CO2 pressurizing——Vacuumizing——Filling——Pressure satabilization——Pressure relief——Stop——Move the bottles to the capping stations——Capping——Take the bottles
3.Main technical parameters:
Dimensions 1800*800*2400mm
Net weight 300kg
Capacity 300-600bottles/h
Applicable bottles 330ml-2L
Working station 4-10
Power supply voltage AC 380V/50Hz(customized)

Other types