8BBL Beer Brewery Equipment Brewhouse with 2-vessel Steam/electric Heating Stainless Steel Tank Turnkey Nano Brewery Equipment for Sale
Product Description
DEGONG 8BBL brewhouse more information
Material:SUS316L or SUS304
Interior Shell: 2B/mirror plate; TH=3.0mm
Exterior Shell:2B/mirror/brushed plate; TH=2.0mm
Heating method:steam,electric or direct fire
Dimple jacket for heat exchanger,polyurethane insulation,TH=80-100mm
stirring methods:upper stirring or bottom stirring
Lauter plate:milling
Grain removal:side discharging or bottom discharging
Tank equips with manhole, light sight glass, washing tube, temperature sensor achieve temperature control, 360 degree sanitory washing ball,material inlet and outlet etc;
Plate heat exchanger: Cooling form,capacity and piping meet requirements
Oxygenation system:oxygenation form, capacity and interface form meet requirement
Working platform:stainless steel
Accessories:cold water pump, hot water pump, filter pump, wort pump, mixer,material &water mixer, wort tester, hop adding device,hop filter device, saccharimeter,worst rake,spent grain recovery and transfer device, CIP system etc.
Mash line:Including all the pipeline,valves and thermal insulation material
2-vessel mash/lauter tun+boiling/whirlpool tun
8BBL brewhouse system component
Mash tun:
Equipped with suitable jacket and mixer to ensure temperature rise rate, avoid coking
large volume, as well as wort boiling, improve the overall system’s efficiency.
Lauter tun
Combined plow knife structure increase lautering efficiency,increasing the diameter of the center circular construction has improved lautering efficiency and spend grains discharge speed greatly. Because of the center circular construction basic design, the mash will be filled into the lauter tun steadily and speedily, the wort will be circulated with low oxygen uptake.Set more suitable wort outlets accord with hydrodynamics principle, assure wort flows through piping etc. long wort collection ring, make wort collection steadily and speedily.
Use specially designed raking arm to raise main shaft seal, avoid leaking to improve sanitation.Can be used as mash tun, meet a variety of process demands of craft beer.
Boiling tun
With inner heater, jacket, mixer. This design makes the kettle tun can be used as adjunct cooker or mash tun, meet the special demands of craft beer process; benefit for heating low-temperature wort more.Inner heater functions to wort forced circulation
Whirlpool tun
Specially designed whirlpool tun bottom accord with hot trub sedimentation characteristics, combined with specially designed hot trub collection zone, can make the hot trub more closely and be discharged directly no need for washing, avoid remixing hot trub into wort when we pump the wort to PHE.
mash system is running
Customers can combine them according to their own needs.
Usually, our standard configurations are as follows:
2-vessel:mash/lauter tun+boiling whirlpool tun
3-vessel: mash/lauter tun+boiling/whirlpool tun+hot water tank
mash tun+lauter tun+boiling/whirlpool tun
mash/lauter tun+boiling tun+whirpool tun
4-vessel:mash tun+lauter tun+boiling tun+whirlpool tun
If you are interested in beer brewery equipment, get in touch with me freely.