To build a own nano brewery two batches per day beer production line 1000L breweries
Product Description
| To build a own nano brewery |
Available with either solid copper brewhouse vessels or polished stainless steel.
Available with either electric or steam heating.
Brewhouse design with mash tun/lauter tun,brew kettle/whirlpool and auxiliary hot liquor tank.
Skid-mounted brewhouse with pre-plumbed stainless steel hard piping for quick and easy installation.
Solid copper brewhouse vessels
Mash/Lauter tun
Gross volume: 1300L Available volume: 1000L
Heating method: steam heating
Inner dome: SUS304 stainless steel plate, 3mm thick
External vessel body: Solid copper cladding on SUS 304 stainless steel
Lower external vessel body: copper cladding on SUS 304 stainless steel
Accessories include manway, spray ball, spray pipe, lower agitator, reduction gear, motor and temperature gauge, inner heater (if needed).
Body: insulated with polyurethane.
Equipped with manway, screen plate, waste grain port, CIP spray ball and sparging spray pipe.
Brew kettle/whirlpool
Outer solid copper dome, highly polished
Inner dome: SUS304 stainless steel plate, 3mm thick
External vessel body: Solid copper cladding on SUS 304 stainless steel
The external of whirlpool tun is made of SUS304 stainless steel plate, 3mm thick, highly polished
Body insulation with polyurethane for heat preservation.
Plate Heat Exchanger
Cooling area: 10m2
Made of SUS304/316
Note: If you have chosen the stainless steel version of this system, all copper items will be replaced by highly polished SUS304 stainless steel.
1000L Brewhouse vessels
We design the brewhhouse drawings based on your requirement
Beer fermenters and bright beer tanks
Fermentationt tanks description:
Material: 304 stainless steel
Interior and exterior finish polished to a sanitary finish
Interior finish pickled and passivated
Exterior brushed, Fully welded exterior shell
60 degree cone bottom(customized other), with an average of 25% head space
Rotating racking port
Top manhole or side manhole
Dual zone dimple cooling jackets
Polyurethane insulation 100mm
CO2 blow off arm
CIP arm and spray ball
Sanitary tri-clamp connection
Dry hop port
Stainless steel handle butterfly valve,sample vale
Safety valve(Breathing valve),Water seal CO2 exhaust valve
Clamps and gaskets, pressure gauge
Stainless steel legs with stainless leveling footpads
We offer these brewing tanks but not just that
Advantage Of Our Brewery Equipment:
Compact Structure, Save floor Space
Superb Processing technology, With Stable Running and High Efficiency
High Output, Low Energy
Support varied recipes To brew, satisfied with the tastes request of beer from different clients
With superior stainless steel and welding procedure, increase life time of equipment
Our Service:
Provided Installation and Training sevices
Free layout design and drawings
3 Year Guarantee
Customized Configuration and vessel surface
We can engrave exclusive logo on the brewery tanks
| Contact Alice today |
Microbrewing, craft brewing or commercial large brewhouses, we have the equipment, supplies & install engineers. Looking to find bottling lines and tanks for sale we have that covered.