Customizable Available Stainless Steel Polyurethane Double Jacket 2000L Cylindrical-conical Fermentation Tank Sale in Vancouver,Canada

We offers a wide array of fermenters(fermentation) and brite tanks(maturation)  tanks that are designed accordingly to our customers’ specifications  and their needs. Our fermenter and brite tanks come in three different  generalized builds (customizable tanks are also available): single wall,  un-jacketed and jacketed. All of our tanks can be pressurized (unless  otherwise requested) and the fermenters have an added bonus of  functioning as both a fermenter and BBT tank.   

Stainless steel fermentation tanks

Specifications:

Interior Tank Thickness: 3.0 mm

Outer Shell Thickness: 2.0 mm

Polyurethane Insulation Thickness: 100 mm

Glycol Jacket (Dimple-Welded) Thickness: 2.0 mm

Stainless steel (304) sanitary construction

100% TIG welded and sanitary polished

the side manholes are can be easily cleaned without any blind area 

the material of the whole tank is stainless steel

Inner surface with a roughness less than 0.6µm to avoid the contamination spots that are hard to wash

2 cooling zone (Cylindrical and Conical part)

Basic pressure vessel – the base tank is a cylindroconically shaped pressure vessel consisting of a cylindrical casing, a conical bottom and arched dome top. From the design phase, through the calculations, manufacturing process and final tests, this vessel is designed and manufactured as pressure tank, for the maximum pressure required by the customer. Mostly we produce cylindroconic pressure tanks for maximum 3.0 bar, but we can produce the tanks up to the maximal pressure  for the customer’s request.

Dimple cooling jacket– Cooling the tank is done with liquid which flows in double jacket of the tanks (most commonly a glycol water is used). The coolant flows through the double jacket channels of the container and circulates between the jacket and water cooler. The temperature in the tank is then controlled by a control system that compares the measured temperature in the tank with the desired temperature. The program-based system opens and closes the valves on the inlets to the tank cooling jackets. 

Breather valve ,side manway ,pressure gauge etc.

Safety valve – This special overpressure relief valve is designed to protect the tank against overpressure by a pressure higher than that for which it is certified and dimensioned. The overpressure relief valve is most often combined with a vacuum relief valve that protects the tank from collapse under vacuum (for example, when the tank contents are drained out using the pump). For bigger tank volumes, both the overpressure valve and the vacuum valve are solved as two separate valves.

Vacuum valve – it protects the tank from collapse under vacuum (for example, when the content is drained out with a pump). With smaller tank volumes, the vacuum valve is replaced with simple non-return valve.

Sample valve – it is used for sampling the product during its tasting and laboratory tests. The valve can be further equipped with a spiral attachment that eliminates the foaming of the beverage and speeds up the sampling process.

Yeast adding tank and side manway

Temperature sensor in the socket – the socket is a small tube welded on the side of the tank for insert the thermocouple of the control system, or thermometer for visual temperature measurement. For tanks of larger volumes, one tank contains two or more sockets for thermal sensors.

PU insulation – The tank is usually insulated with a polyurethane foam (optionally with other insulating material) that fills the space between the inner jacket and the outer shell of the tank. Usually, we only isolate only both the cylindrical and conical parts of the tank. On request, we also can insulate the upper and lower bottoms of the tank. 

Customer sample （beer brewing equipment）

Packaging Details: standard wooden package 

Package Type : As usual, we adopt wooden case as package type. It's suitable for long-distance transport. According to customers' special demand, we could adopt sheet iron case and so on. 

Staff are preparing for transportation

If you are interested in our craft beer equipment, need a quotation or you simply want to discuss your project with us, get in touch and we will be happy to assist you.