Classical Pub brewery 500L electric brewhouse configuration beer brewing equipment
Product Description
Turnkey Microbrewery Description
A complete set of Stainless steel beer brewhouse
| Brewery---Electric Brewhouse system |
| Mash Tun/Brew kettle |
Gross volume: 650L Available volume: 500L Heating method: Electric heating elements Inner dome: SUS304 stainless steel plate, 3mm thick, internal polished Lower external vessel body: copper cladding on SUS 304 stainless steel Accessories include manway, spray ball, spray pipe, agitator, reduction gear, motor and temperature gauge, inner heater (if needed). Body: insulated with polyurethane. |
| Lauter Tun |
Gross volume: 650L, available volume: 500L, Equipped with manway, screen plate, waste grain port, CIP spray ball and sparging spray pipe. Inner dome: SUS304 stainless steel plate, 3mm thick External vessel body: Solid copper cladding on SUS 304 stainless steel |
| Whirlpool |
Gross volume: 650L, available volume: 500L, Equipped with manway, spray ball and spray pipe. The external of whirlpool tun is made of SUS304 stainless steel plate, 3mm thick, highly polished Body insulation with polyurethane for heat preservation. |
| Plate Heat Exchanger |
Cooling area: 5m2; Made of SUS316 |
| Wort Oxygen Device |
Made of SUS304 stainless steel, internal polished External is made of stainless steel, polished. Includes inlet and outlet of mash, sterile oxygen port (mix sterile oxygen with mash fully). |
Others: Workstation and staircase 3m3 wort pumps, sanitation grade Portable CIP/Beer Transfer Pump |
Yeast additive device
Volume: 10L
Made of SUS304 stainless steel carefully, internal polished
External is made of stainless steel, polished.
Includes three connection ports: additive yeast port (with sight glasses), sterile air port (sterile air filter) and mash pipe connection port, with one double metal temperature gauge.
Brewhouse equipped workstation and staircase
Fermentation System
Cylindrical-conical fermentation tanks
Gross volume: 630L or 1300L Available volume:500L or 1000L
Cooling means: jacket cooling
Coolant medium: glycol
Inner and outer of the tank are all made of SUS304 stainless steel, the internal side polished, the external is polished by auto-polishing machine.
Stainless steel dimple plate glycol cooling jacket
Internal tank is 3mm
The external is 2mm.
On the bottom there is a drain, on the top there is an exhaust and CIP port, coolant in and coolant out pipe.
The tank body is equipped with manway, sample valve, temperature sensor, spray pipe, CIP sprayball, pressure gauge and butterfly valves etc.
Fermentation controllers
Quantity: To be determined(2,4, 6units or more)
Beer fermentation tanks in stock
Serving Tanks
Serving tank (Jacketed BBT version)
Gross volume: 600L Available volume: 500L
Inner and outer hull are all made of SUS304 stainless steel, polished
The thickness of the internal stainless steel tank is 3mm
The thickness of the external is 2mm
The beer in the tank body is cooled off by means of a sidewall stainless steel dimple jacket
Side manway on lower sidewall
On the bottom there is a drain; on the top there is a CIP assembly and PRV port
The accessories of the dispensing tank are spray ball, manway, sample valve, glass level tube, temperature sensor, spray pipe, pressure gauge and butterfly valves etc.
Serving tank (Single shell SST version Alternative)
BBT version serving tanks
Single shell SST version serving tanks Alternative
Contact us
Ready to Get Started Building Your Dream brewery?
Contact Alice Today!