Beer Brewery Unit 1000L Fermenter Storage Tank CCT Beer Fermentation Complete Fermentation Sets for Sale
Product Description
1000L SUS304 Fermenter description
Material: SUS 304/316 AISI304
Volume: 1000L Efficient, 1250L total volume, 30% clearance at the top not counting the arched top.
Doomed top, 60 degree conical bottom.
Double layer with cooling jacket.
Working pressure: 2 bar. Tested up to 3 bar.
Inner tank thickness: 4mm, outer garment: 2mm.
Insulation of polyurethane, thickness: 100mm, sides and bottom are insulated.
The cooling cap is welded in points to the tank.
2 cooling zones controlled separately: cylinder and conical base.
Exterior: Polished.
Internally polished, all welding surfaces are polished and cleaned with acid.
Roughness: 0.4 um
4 stainless steel legs with adjustable feet. Option: Wheel.
At the top: CIP arm, Sprayball, combined pressure and suppression valve (PVRV), hobport (blind plate with 4″ triclamp).
Option: Butterfly valve on the entrance for dry hop.
On the side: Glycol Inlet and outlet, thermo sensor and sampling port.
Manhole in the top or side of your choice.
At the bottom: drain valve, beer outlet, racking arm, carbonantion device and thermo sensor.
CIP arm included Steam gauge.
Mechanical pressure valve mounted on CIP arm.
Prepared for half batches.
Input and output for glycol cooling
solenoid valve to control glycol.
If you are interested in DEGONG beer brewery equipment, please feel free to contact me.