800 cans/hour Beer Canning Line for Craft Beer Packaging
Product Description
Beer Canning Line Product Introduction
The 800 cans/hour beer canning line is a fully automatic can filling and sealing system specifically developed for microbreweries and small-scale beverage producers. It combines rinsing, CO2 pre-purging, isobaric filling, and seaming into one integrated unit. Built with sanitary-grade materials and controlled by a PLC system, it ensures consistent product quality and hygienic processing. This equipment addresses space limitations and efficiency challenges in small breweries, enabling stable and precise canning operations. It is suitable for breweries, beverage startups, and small-scale producers seeking reliable, compact, and automated beer canning solutions.
Working Principle
The process begins by placing cans onto the sorting table, followed by pressing the start button in automatic mode. Cans move into the rinsing station for cleaning, then proceed to the CO2 pre-purging station, where air is replaced with CO2 to reduce oxygen exposure. Next, cans enter the filling station, where isobaric filling is performed with synchronized valve control. After filling, cans move to the lid dropping station, followed by the seaming station for secure sealing. Finally, the completed cans pass through the spray station and are discharged for further packaging.
Product Parameter Table
Size | 1.20x 0.80×1.80 m |
Weight | 200 kg |
Gross weight | 350 kg |
Power | Single Phase 110 V-240 V,AC 50/60 Hz is default |
Power consumption | 900 W |
Main material | AISI304, Aluminum Alloy and POM |
Beer source requirement | Temperature: 30.2 – 32 F (-1 to 0C) |
Co2 regulator | 58-65 psi（0.4MPa-0.45Mpa） from plant system connected to canning system with 10mm OD barbed fitting |
Air regulator | 87-102 psi（0.6MPa-0.7Mpa） from plant system connected to canning system with 10mm OD barbed fitting |
Time setting way | F110 Siemens PLC 200 smart and IEV3 Touch Screen |
Dissolved oxygen | ≤20ppb |
Can type | The machine can be configured for nearly all standard can sizes! Change over between different can dimensions is a snap, requiring only a few simple tools and less than 30 minutes. |
Rinse function | 3 S/pcs（adjustable） |
Spray function | 2 S/pcs（adjustable） |
Main Features
Integrated rinsing, CO2 purging, filling, and seaming in one system
Isobaric filling technology ensures stable pressure and minimal foam formation
PLC-controlled automation with touchscreen for precise parameter management
Compact footprint designed for microbrewery space constraints and flexibility
Electrode-based detection system supports accurate can positioning and filling
Compatible with inline equipment such as depalletizer, labeler, and printer
Application Scenarios
Microbreweries requiring compact, fully automated beer canning solutions
Craft beer production lines focusing on consistent quality and low oxygen exposure
Carbonated beverage packaging including soda, sparkling water, and flavored drinks
Pilot brewing and R&D facilities for small-batch product testing and validation
Small to medium beverage manufacturers seeking efficient and hygienic canning lines
Independent beverage brands requiring flexible, scalable canning solutions
FAQ
Q1: What production capacity can this canning line achieve?
The system is designed for up to 800 cans per hour, depending on can size, product viscosity, and operating conditions.
Q2: Is this line suitable for microbreweries with limited space?
Yes, it features a compact footprint specifically engineered for microbreweries and small production facilities with space constraints.
Q3: How does the system reduce oxygen exposure?
It uses a CO2 pre-purging station to remove air from cans before filling, significantly lowering oxygen levels and preserving product freshness.
Q4: What level of automation does the machine provide?
The entire process is fully automated and controlled by a PLC system with touchscreen interface for easy parameter adjustment.
Q5: Can the filling parameters be adjusted for different products?
Yes, filling volume, pressure, and timing can be adjusted and stored to accommodate different beverage types and can formats.
Q6: Is the machine compatible with other production equipment?
Yes, it can be integrated with depalletizers, labelers, date coders, and other inline packaging equipment.