5BBL 7BBL Beer Brewery Equipment Stainless Steel Tanks Brewhouse with 2/3vessel Suitable for Restaurants, Hotels, Pubs
Product Description
Beer brewery equipment brief description
Two vessels or three vessels brewhouse: mash/lauter, kettle/whirlpool, water tank
Heating method: electric heating, can also be gas heating, steam heating, etc
It can fix with hopback. Hot wort grant
The pump will be frequency control, ABB brand or other world famous brand
The heater exchanger can be single stage or double stage, inside will be SUS304 material
The operation platform can be stainless steel
The fermenter will be fixed with 4~8 fermenter, its quatity, can be flexible according to customer's requirement. Or follow our suggestion
Carbonation device will be optional
The bright beer tank will be optional, and it can be fixed with carbonation device and sight glass for optional
With related cooling system
50L or 100L CIP cleaning system
PID control or PLC simens control
5BBL brewhouse system & bright beer tank
DEGONG brewhouse system parameter
2-vessel: mash/lauter tank and boiling/whirlpool tank;
Combination tank: Mash lauter/whirlpool tank, boiling tank;
3/4 vessels is also available if pub brewery space and operation needed;
Hot water tank, cold water tank is optional.
Accessories
Lauter tank raker and wort pump with VFD ABB motor to adjust the speed. Laser cutting sieve plate with the gap 0.7mm and thickness is 4.0mm.
Tempered glass top manway for brewhouse.
Two stage type plate heat exchanger, stainless steel type.
Glass type sight glass to make sure wort more clear during lautering
Stainless steel 304 operation platform
temperature probe, wort pump, hot water pump, ring, cleaning ball,sight glass
side manhole, raker
ring, temperature probe, hopper
DEGONG fermentation system parameter
4 stainless steel legs with leveling footpads
Interior shell: 304 stainless steel, thickness 3.0mm
Exterior shell: 304 stainless steel, thickness 2.0mm
Interior and exterior finish bright polish to 0.4μm, hygiene surface
60 degree cone bottom, other angles can be specified during the design process
Combined drain extensions and beer port in cone are standard
25% headspace, unless a different volume is requested
Top or side manway door
Dual zone in sidewall and cone dimple cooling jacket with glycol inlet and outlet
Polyurethane insulation thickness 80mm for cooling jacket on side and bottom
Fully welded exterior shell
Non welding CIP arm and rotating 360 degree reach spray ball
Ice water solenoid valve, pressure relief valve (safe valve) are standard
Pressure gauge, Temperature probe,Sanitary sample valve,mechanical regulator valve,raking arm and port
Tank complete with piping, fittings, sanitary valves and all parts.
Carbonation port is available for special request (stone not included)
Dry hop ports and/or hop bag hooks in any fermenter of any size for special request
If you are interested in DEGONG equipment, please contact me without hesitation.