500litre 1000litre 2000litre Double Wall Beer Fermenter High Quality Beer Fermentation Tank with Glycol Jacketed

The design of fermenter is based on our vast beer knowledge and especially the conical fermenter bottom and the fact that we combine fermentation and maturation in the same vessel is very important. When calculating your fermenting and lagering capacity and configuration, sufficient time for fermenting and lagering to produce quality beers must be taken into consideration.

Stainless steel fermenter standard configuration

Function: wort Fermentation or maturation

Interior Shell: SUS304 full welded; TH=3mm

Exterior Shell:SUS304 full welded; TH=2mm

100% TIG welding with pure argon gas shield

Interior Finish: Overall polishing to 0.4~0.6 mm without dead corner

Insulation: Polyurethane; TH=80mm

Glycol Jacket: Dimpled plate on cone and side

Stringent tank leakage test by water and pressured gas

Stringent Jacket leakage test by water and pressured gas

Dished head and 60 degree cone bottom

Sanitary top mounted manway

CIP arm with 360° coverage CIP spraying ball

Full sanitary sampling valve

Mechanical relief valve 2 bar on CIP arm

Shockproof pressure gauge on CIP arm

Rotating racking arm and port on cone with butterfly valve

Tri clamp discharge arm with butterfly valve

Thermowell for high accuracy temperature sensor

4pcs completely SUS304 heavy duty legs with leveling pad and legs support

Complete valves, fittings and all parts

Level tube for special request

Carbonation port and stone for special requirement

Customized fermenter for Italian customers

If you have any special requirement for the fermenter, please feel free to contact me.