500L Double Wall Dimple Jacket Stainles Steel Conical Insulated Beer Fermentation Tank Available
Specifications
Fermentation tank is a vertical, tapered, cylindrical vessel for the beer fermentation and maturation processes.Beer fermentation tanks,also refer to Uni-tank,which are vessels of various size usually made from stainless steel that contain a mixture of malted grain, hops, yeast and water to create a liquid collectively known in the brewing process as wort. Fermentation tanks vary in temperature depending upon the beer being produced.
| Fermentaiton tank Features |
What is beer fermentation tank Fermentation tanks, or more commonly fermenters, are key components in beer brewing.Fermenters are specialized tanks designed to precisely control temperature and maintain the optimal conditions for fermentation, which occurs once the wort has been transferred from the brewhouse to the fermenter; a conical-bottom design is highly recommended for fermenters allowing for easier yeast harvesting. | ||
Size: | Technical parameter: | Details configuration accessories |
Gross capacity:650L Useful capacity:500L Outer :Ø960mm; Inner:Ø800m Height: 2150 mm; | a.Stainless steel 304 sanitary construction b.100% TIG welded and sanitary polished c.Design pressure is 0.3MPa,using pressure is 0.15MPa d.4heavy duty stainless steel legs with adjustable height and leveling footpads e.Interior:thickness 3mm; Outerior:thickness 2mm f.Interior treatment:Mirror polishing g.Mirror polishing to 0.4μm without dead corner. h.Jacket:stainless steel 304,thickess 1.5mm i.Insulation:100mm Polyurethane j.60 degree conical bottom k.Heat exchanger area:2.9m2 | l.Side mahole m.Lifting ear n.Temperature sensor o.Pressure guage p.Machinery regulator q.Breathing valve r.Hops adding hole s.Simple valve t.Raking arm u.Valves&fittings v.Add carbonation stone w.blow-off/ clean-in-place (CIP) tube |
| Technical date |
Sprinkler head | Removable |
Inspection Opening | Oval shape (on top cover / on cylindrical part) |
Vacuum Safety Valve | DN 50 / DN 80 fitted on top cover |
Overpressure Safety Valve | DN 25 fitted on top cover, preset to 1,5 bar / 3,0 bar |
Handling Eyelets | 2 - 4 pcs |
Sampling Valve | DN 15 |
Valves | DN 25 / DN 40 / DN 50 |
Temperature Sensor | Needle type PT – 100, 1 - 3 pcs |
Suppression Device with Manometer | DN 25 / DN 40 |
Certification and RTG tests | TÜV or Slovak Technical Inspection |
Tank body
Tanks are available with torispherical and conical bottom
Torispherical lid resists high pressure and design according to DIN Standard
Conical bottom assures the easier removal of yeast from the tank
Tanks are available with side, top and bottom manholes depending on the size and your needs
Top manholes can handle high pressure, easily to handle and made in insulated version
Side manholes are can be easily cleaned without any blind area
Material quality of the whole tank is food grade SUS304/SUS316/AISI304/AISI316
Etched and passivated inner surface with a roughness less than 0.4 µm to avoid the contamination spots that are hard to wash
Cooling
2-3-4 cooling zone on cylinder and cone depending on the size
Cooling jackets made with the spot welding technology
100 mm PU foam insulation with a thermal conductivity of 24 mW/mK for the safest storage of heat and economical energy use
100 % stainless steel coating available in a variety of surface finishes such as 2B pickled, different surface roughnesses, polished and marbled
Fittings
All pipes and fittings are made in accordance with DIN Standard
Material quality of all fittings are food grade SUS304/SUS316/AISI304/AISI316
Vacuum and pressure safety valves, complying with all standards and positioned for an easy cleaning
Stainless steel pressure gauge, optionally can be ordered in flat membrane version
Technological pipings on the tank (beer pipe, yeast pipe, CIP pipe) produced with using the bending technology where no welding is used resulting that there are no infection points that might occur at welding jointst
Depending on tank sizes, each tank equipped with 1-2-3 pcs of accurate thermal sensor
=
| Delivery&Packing |
We will choose Wooden case to protect the equipment from being damaged in transit.If the equipment's height exceed the container's height,we will put down the equipment and fix it by iron frame.
| Company |
Working shop
Certification
| Contact us |
If you have interest,please get in touch with me freely.