10BBL Brewery equipment for startup business provided by China beer manufacturer

2-vessel brwhouse with hlt combined on deck

Our attention is the best brewhouse system to maximum output and efficiency.

A brewhouse is usually described and measured by the number of vessels the system has. There is a large number of different setup combinations that will be suggested in relation to the height, floor space, and levels of the facility.

For example:

2-vessel brewhouse: A combined mash/lauter tun + a kettle/whirlpool combination vessel + HLT (Hot Liquor Tank).

4-vessel brewhouse: Mash tun; lauter tun; brew kettle; whirlpool vessel(if necessary,a hot liquor tank can be equipped for delivering brewing efficiency).

Adding hops in a brew kettle

Rakes and false bottom in the mash lauter tun

Specifications：

Available capacity of 1bbl to 100bbl system

Optional heating style of steam, electric and direct fire for brewhouse tanks

Custom engineering of brewhouse layout with brew deck

Auto PLC control panel be available for certification of CE requirements

VFD controlled reducer and wort pump

Assembly sanitary rotary spray balls for cleaning

Polyurethane full insulated 70-100mm

Temperature sensor(RTD) in a thermowell

Rake and mash agitator assembly with top/bottom reducer

False bottom for lauter tank

Grist hydrator with strike water mixing station

Plate heat exchanger for cooling wort

Independent hot liquor tank or combine with brewhouse tanks

Stainless steel 304 construction

2D/3D engineering for brewery set up simulation

10bbl or 20bbl fermenters for 10bbl brewhouse 

Fermentation vessels are an important part of every brewery, from the microbrewery setup to the largest commercial brewery enterprise. 

The cylindro-conical fermentation tank with cooling jacket, insulation, and cone  bottom. Stainless Steel Fermentation Tank comes complete with top-dished head and custom-fabricated round body.

All welding is done under a controlled protection-gas atmosphere; interior and exterior finishes are perfected, and cooling jackets complete the highest standard.

Side manway;60 degree cone and drain outlet

Pressure gauge;racking arm

Specifications:

Capacity available from 1bbl, 5bbl, 7bbl,10bbl, 20bbl, 30bbl fermenter to 100bbl

SS 304 construction

Top dished head with pressure vacuum relief valve

Top manway or side shadowless manhole

Dry Hopping port with cap

Sanitary rotary spray ball

PU foam insulated

Cooling jacket on cylinder and cone bottom

Dimple jacket to ensure good fermentation

CIP arm assembly with bung valve and pressure gauge

Sanitary thermowell

Sample Valves

Cone racking arm

60 degree cone bottom Bottom discharge

Four legs adjustable feet

Available pressure certificates of PED for 2014/68/EU etc

Single wall tanks are available 

Single layer, double layer, brewing tanks with or without insulation are available. We will design the brewery  vessel exactly according to your wishes to increase your satisfaction and sense of use.

Microbrewing, craft brewing or commercial large brewhouses, we have the equipment, supplies & install engineers. Looking to find bottling lines and tanks for sale we have that covered.