1000L Customized Complete Brewery Equipment Stainless Steel 304/306 Steam Heated Beer Brewing System
Introduction of beer brewing equipment
| 1000L Beer brewery equipment introduction |
Beer brewhouse bacic configuration
Beer mashing is one of the most important processes in wort preparation.During mashing, the water is thoroughly mixed with the malt.Under the action of various enzymes, the soluble substance in malt was completely leached out, and the wort was fermented into beer under the action of fermentation.
Electric supply:3phase/380(220, 415,440…)v/50 (60)HZ ;Single Phase/ 220(110, 240…)v/50(60)Hz(Customized)
Component:Mash tun, Lauter tun, Boiling Kettle, Whirlpool tun in various combination
Hot water tank and cold water tank for optional in special combinations
Heating method:electric heating,direct fire heating and steam heating.
Material:Stainless steel are popular because of easy maintenance and clean, copper cladding for optional
Other items:Steam/gas/diesel steam boiler,VFD pump,Siemens control panel, flex grist auger,Plate heat exchanger,Oxygen system,pipes,platform
Features of 1000L beer brewhouse
Gross capacity:1400L,
Useful capacity:1000L
Outline size: φ1400*2500 mm.
Inner:SS304.TH=3.0mm Outer:SS304.TH=2.0mm
Double-layer wall structure with the insulation of 100mm Polyurethane
Steam jacket or heating element
100% TIG welding with pure argon gas shield
Interior Finish: Overall polishing to 0.4~0.6 μm without dead corner
Heavy duty false bottom with 0.7mm gap of the sieve
Fully insulated vessel
SS CIP High-flow rotary spray ball with 360 degree of coverage
Sparge arm assembly
Top manway
Side manway for spent grain out
Sight glass light
Grist hydrator
Raker with VFD motor in Lauter tank
Agitator with VFD motor in boiling tank
Fermentation tank
DEGONG Fermentation tank is double wall isobaric stainless steel tanks, are pressure tested to 3.0 bar and are fitted with a safety pressure valve set at 2.5 bar. Single or dual CIP spay balls are fitted for CIP operation. Overhead cross arm extending to the side is provided with a pressure regulating device and a sanitary air trap for releasing and regulating carbon dioxide during fermentation. Standard provision include front or overhead manhole opening.
Features of 1000L beer fermentation tank
Gross capacity:1300L,
Useful capacity:1000L
Outline size: φ1300*2550 mm.
Inner:SS304.TH=3.0mm Outer:SS304.TH=2.0mm
100% TIG welding with pure argon gas shield
Interior Finish: Overall polishing to 0.4~0.6 μm without dead corner
Insulation: Polyurethane; TH=100mm
Glycol Jacket: Dimpled plate on cone and side
CO2 blow-off arm with butterfly valve
Full sanitary sampling valve
Breathing valve on the top of tank
Mechanical relief valve 2 bar on CIP arm
Shockproof pressure gauge on CIP arm
Dry hopping port with solid end cap
4pcs completely SUS304 heavy duty legs with leveling pad and legs support
Thermowell for high accuracy temperature sensor
| Our service |
As owning an experienced and creative engineering team, we could offer you professional solutions for your plant and equipment.
If you already have solutions, we would fabricate the equipment exactly as per your request.
We could offer you training of brewing craft beer and operating equipment if needed.
Equipment can be customized according to your request.
We also offer you 36 months warranty.
| Company information |
DEGONG Brewery equipment can used in commercial brewery or brewpub or restaurant.DEGONG can provide any type of brewing equipment according to your requirement.If you have interest,please get in touch with me freely.