10-HL Brewing System complete brewing system brewpub system brewery tanks
Product Description
| 8.5BBL 10HL Brewing System Details & Description |
2-vessel brewhouse system with plate heat exchanger
Skid-Mounted Brewhouse
1-Brewkettle/Mash Tun
Gross volume: 1300L Available volume: 1000L
Heating method: steam heating
Outer solid copper dome, highly polished
Inner dome: SUS304 stainless steel plate, 3mm thick, internal polished
Lower external vessel body:SUS 304 stainless steel,150 degree cone.
Accessories include manway, spray ball, spray pipe, lower agitator, reduction gear, motor and temperature gauge.
2.Lauter Tun & Whirlpool Combi Vessel
Dual tank vessel:
The upper vessel is the lauter tun
The external of Lauter tun is made of SUS304 stainless steel plate, 3mm thick, highly polished
Lauter Tun:
Gross volume: 1300L, available volume: 1000L,
Equipped with manway, screen plate, waste grain port, CIP spray ball and sparging spray pipe.
The lower vessel is the whirlpool
The external of whirlpool tun is made of SUS304 stainless steel plate, 3mm thick, highly polished
Whirlpool
Gross volume: 1300L, available volume: 1000L,
Equipped with manway, spray ball and spray pipe.
Plate Heat Exchanger
Cooling area: 5m2
Made of SUS304
Wort Oxygen Device
Made of SUS304 stainless steel, internal polished
External is made of stainless steel, polished.
Includes inlet and outlet of mash, sterile oxygen port (mix sterile oxygen with mash fully).
Fermentation System
Cylindrical-conical fermentation tanks
Gross volume: 1200L Available volume: 1000L
Cooling means: jacket cooling
Coolant medium: glycol
Inner and outer of the tank are all made of SUS304 stainless steel, the internal side polished, the external is polished by auto-polishing machine.
Stainless steel dimple plate glycol cooling jacket
Internal tank is 3mm
The external cladding is 2mm.
On the bottom there is a 2” t/c drain, on the top there is an exhaust and CIP port, coolant in and coolant out pipe.
The tank body is equipped with manway, sample cock, temperature sensor, spray pipe, CIP sprayball, pressure gauge and butterfly valves etc.
Fermentation semi-auto/ auto-control controllers
Quantity: Determined by number of tanks
Pressure gauge,thermometer,Welding of tank
1000L 2000L 3000L 4000L Brite beer tank
Serving tank (Jacketed BBT version)
Gross volume: 1200L Available volume: 1000L
Inner and outer hull are all made of SUS304 stainless steel, polished
The thickness of the internal stainless steel hull is 3mm
The thickness of the external plate is 2mm
The beer in the tank body is cooled off by means of stainless steel dimple plate
On the bottom there is an entrance; on the top there is an exhaust and CIP port, coolant in-out pipe.
The accessories of the dispensing tank are spray ball, manway, sample cock, glass level tube, temperature sensor, spray pipe, pressure gauge and butterfly valves etc.
100L 200L CIP Station cart
| Contact Alice today |
Microbrewing, craft brewing or commercial large brewhouses, we have the equipment, supplies & install engineers. Looking to find bottling lines and tanks for sale we have that covered.