 |
| Thickness of material (mm): | |
|---|---|
| Insulation: | |
| Heating method: | |
| Construction: | |
| Material: | |
| Quantity: | |
We design and manufacture complete beer brewery equipment, all brewing systems can be designed according to customer’s requirement.We also can recommend a best brewing system to the customers who don't know much about the beer industry based on their brewing plan.
| Usage Classify |
Beer Brewery equipment is used for lab ,pub,bar,hotel,restaurant,industry brewery etc. from 50L to 30000L per day. Complete beer brewing equipment including malt miller, brewhouse, fermentation tanks, bright beer tank, glycol system, controlling system and CIP cleaning system.Except these basic brewing system,you can choose bottling machine,canning machine ,labeling machine.....according to your requirement.We can provide the design solution from drawing until after installation.
Material Of All The Tanks
Interior stainless steel 2.5~3.0mm, exterior stainless steel/luxury red copper cladding 1.5~2.0mm
The raw materials is SUS304 and SUS316, which require materials quality certificate.
We’ll test the materials quality using chemical agent when we receive the materials.
Excellent appearance
The polishing standard of welding seam is 240 um, 60mm width. All of connection required turn up workmanship and all of welding seam required polishing, which is more smooth tank surface. We're very serious about the excellent appearance of tanks.
Insulation layer: Polyurethane or rockwool, thickness 80~100mm
| Complete Beer brewing equipment introduction |
— Malt Milling Unit
Function: It is used for malt milling.It is the first part of beer brewing equipment.
Material: Carbon steel or stainless steel for optional.
Flexible or steel auger or a bucket type conveyor to directly lift the milled grain to mash tun
— Malt mashing system
Function:It is used for malt mashing.The water and the crushed malt are fully mixed, and the soluble substances in the malt are thoroughly leached under the action of various enzymes
Component:mash tank,lauter tank,boiling tank and whirlpool tank(The four tanks can be combined into 2 or 3 or 4 vessels ),wort pump,plate heat exchanger,hops filter,operation platform,aeration device.
Heating method:Electricity heating/ steam heating(electricity/LPG/diesel oil/nautral gas)/ direct fire heating method
—Fermentation system
Function:The wort obtained during saccharification is fermented into beer under the function of yeast.
Component:Fermentation tank,bright beer tank,yeast adding tank
compression resistance design, design pressure 0.3Mpa; working pressure 0.15Mpa
Polyurethane insulation and stainless steel cooling jacket, 60 or 72 degree bottom cone;Single tank, single control.
— Cooling Unit
Insulated glycol water tank with or without copper coil for glycol liquid holding and mixing
Efficiency chillers or refrigerators with fryon to supply cooling energy
Sanitary centrifugal pump for glycol water recycle among tanks and heat exchanger
All pipes, fitting, insulation materials are included
— Controlling Unit
Electrical controlling cabinet with temperature, on-off controlling , solenoid valves etc are included
PLC with touch screen panel for special request
— Beer Dispense
Semiauto or automatic bottling machine with rinsing, filling, capping, labeling etc
Semiauto or automatic canning machine
Flash pasteurizer or tunnel pasteurizer is available
— Cleaning Unit
Function: Used for cleaning and washing.
Component: Disinfection tank, Alkali tank (with heating element), cleaning pump and etc.
Purpose: Equipped with wheel, easy to move and operate, washing all tanks when it finishing brewing.
— Other Facilities
Steam boiler for brewhouse heating
Water treatment for brew water
Oil free air compressor
Brewery lab instruments for beer quality test
| Company information |
| Contact us |
If you have interest in DEGONG brewing equipment,welcome to contact me freely.
