Thickness of material (mm): | |
---|---|
Insulation: | |
Material: | |
Heating method: | |
Manhole of fermenter: | |
Availability: | |
Quantity: | |
DGET-2000L
DGET
8438400000
Grain handling: Mill, conveyor (flexi auger or chain disc), hopper etc. With weight scaling
Brewhouse: Three or four vessels, including piping, PHE etc.
Cellar: Fermenter, storage tank and BBTs, for fermentation of different kinds of beer, all assembled and isolated
Cooling: Chiller connected with glycol tank for cooling, with ice water tank and plat cooler for wort cooling
CIP: Fixed CIP station or Portable CIP unit
Filtration: Diatomite filtration, membrane filter, Plate frame filtration unit etc.
Compressed air unit and N2 generator, all piping line connected with system
Steam: Dimple plate jacket with inlet/outlet fittings for Steam heat transfer
Electric: Use electric heaters in jacket to heat the medium in the jacket
Gas fired: Use gas burner at bottom to heat tank directly
Higher wort wort extract
Lower energy cost and material consumption
Well adjusted temp and water blending unit for better grain and water mixing
Special designed steam jacket unit to increase steam using efficiency and avoid “water hammer” problem
Special tank and piping construction to avoid the wort aeration problem and decrease the material lost
Internal heater for separate kettle, working with cylinder and bottom jacket for better boiling effect.
Possible to make boiling process under pressure, especially for brewery at higher altitude.
Special designed steam condensing unit, with both steam condensing and water heating function
Cellar tanks with good design updating for better cooling effect and accurate temp control
Pre-assembled cellar piping, with cat walks for operation on top or manifold or piping corridor
Cooling unit for current use and well prepared for future expanding
Automation system with curve indication and production record printing, with recipe storage function, clients can create new recipe as the exact production requirement.
We have two kinds of controls
Semi-automated: temperature control for each tank according to fermenting recipe
Fully automated: temperature control and pressure control for each tank, programmed recipe
If you are interested in beer equipment, please feel free to contact me.
Grain handling: Mill, conveyor (flexi auger or chain disc), hopper etc. With weight scaling
Brewhouse: Three or four vessels, including piping, PHE etc.
Cellar: Fermenter, storage tank and BBTs, for fermentation of different kinds of beer, all assembled and isolated
Cooling: Chiller connected with glycol tank for cooling, with ice water tank and plat cooler for wort cooling
CIP: Fixed CIP station or Portable CIP unit
Filtration: Diatomite filtration, membrane filter, Plate frame filtration unit etc.
Compressed air unit and N2 generator, all piping line connected with system
Steam: Dimple plate jacket with inlet/outlet fittings for Steam heat transfer
Electric: Use electric heaters in jacket to heat the medium in the jacket
Gas fired: Use gas burner at bottom to heat tank directly
Higher wort wort extract
Lower energy cost and material consumption
Well adjusted temp and water blending unit for better grain and water mixing
Special designed steam jacket unit to increase steam using efficiency and avoid “water hammer” problem
Special tank and piping construction to avoid the wort aeration problem and decrease the material lost
Internal heater for separate kettle, working with cylinder and bottom jacket for better boiling effect.
Possible to make boiling process under pressure, especially for brewery at higher altitude.
Special designed steam condensing unit, with both steam condensing and water heating function
Cellar tanks with good design updating for better cooling effect and accurate temp control
Pre-assembled cellar piping, with cat walks for operation on top or manifold or piping corridor
Cooling unit for current use and well prepared for future expanding
Automation system with curve indication and production record printing, with recipe storage function, clients can create new recipe as the exact production requirement.
We have two kinds of controls
Semi-automated: temperature control for each tank according to fermenting recipe
Fully automated: temperature control and pressure control for each tank, programmed recipe
If you are interested in beer equipment, please feel free to contact me.