15BBL 1800L Beer Brewery Equipment Commercial Brewing System SUS304/316 Tanks for Sale

Brewhouse system brief description

1.Mash tun:

Equipped with suitable jacket and mixer to ensure temperature rise rate, avoid coking. large volume, as well as wort boiling, improve the overall system’s efficiency.

2.Lauter tun:

Combined plow knife structure increase lautering efficiency,increasing the diameter of the center circular construction has improved lautering efficiency and spend grains discharge speed greatly. Because of the center circular construction basic design, the mash will be filled into the lauter tun steadily and speedily, the wort will be circulated with low oxygen uptake.Set more suitable wort outlets accord with hydrodynamics principle, assure wort flows through piping etc. long wort collection ring, make wort collection steadily and speedily.

Use specially designed raking arm to raise main shaft seal, avoid leaking to improve sanitation.Can be used as mash tun, meet a variety of process demands of craft beer.

3.Boiling tun

With inner heater, jacket, mixer. This design makes the kettle tun can be used as adjunct cooker or mash tun, meet the special demands of craft beer process; benefit for heating low-temperature wort more.Inner heater functions to wort forced circulation

4.Whirlpool tun

Specially designed whirlpool tun bottom accord with hot trub sedimentation characteristics, combined with specially designed hot trub collection zone, can make the hot trub more closely and be discharged directly no need for washing, avoid remixing hot trub into wort when we pump the wort to PHE.

3-vessel brewhouse system 3D

1800L 3-vessel brewhouse combining form

1-mash/lauter tun+boiling/whirlpool tun+hot water tank

2-Mash tun+lauter tun+boiling/whirlpool tun(optional: hot water tank)

3-Mash/lauter tun+boiling tun+whirlpool tun(optional:hot water tank)

3-vessel: mash/lauter tun+boiling/whirlpool tun+hot water tank

1800L brewhouse technology configuration

Material:SUS316L or SUS304

Interior Shell: 2B/mirror plate; TH=3mm

Exterior Shell:2B/mirror/brushed plate; TH=2mm

Heating method:steam, electricity or direct fire

Dimple jacket for heat exchanger, rock wool insulation,TH=80-100mm

stirring methods:upper stirring or bottom stirring

Lauter plate:milling

Grain removal:side discharging or bottom discharging

Tank equips with manhole, light sight glass, washing tube, temperature sensor

achieve temperature control, 360 degree sanitory washing ball,material inlet and outlet etc;

Exhaust system:indoor or outdoor exhaust pipe and fan;

Plate heat exchanger: Cooling form,capacity and piping meet requirements

Oxygenation system:oxygenation form, capacity and interface form meet requirement

Working platform：stainless steel 304/316

Heating system: design capacity meet the requirement

Cooling system: design capacity meet the requirement

Accessories:cold water pump, hot water pump,, filter pump, whirlpool pump, wort pump, mixer,material &water mixer, wort tester, hop adding device,hop filter device, saccharimeter,worst rake,spent grain recovery and transfer device, CIP system etc

Mash line:Including all the pipeline,valves and thermal insulation material

1-spent grains hatch 2-sight glass 3-raker 4-ring

weld details for tanks

If you are interested in DEGONG beer equipment, get in touch with me freely.